{"product_id":"applique-murale-metal-et-tissu-ritta","title":"Metal and fabric wall sconce - Cerynalia","description":"\u003ch2\u003eRitta: a fabric lampshade for a reading nook\u003c\/h2\u003e\u003cp\u003eRitta is a reading wall light with a simple design: a metal frame and a fabric lampshade. The fabric softens the light source and prevents harsh glare in your field of vision, which matters when reading while seated.\u003c\/p\u003e\u003cp\u003eThe socket is an E27, and the bulb is not included.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMain materials:\u003c\/strong\u003e metal and fabric\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBody:\u003c\/strong\u003e metal\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLampshade:\u003c\/strong\u003e fabric\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSocket:\u003c\/strong\u003e E27, one per wall light\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBulb:\u003c\/strong\u003e not included, LED, incandescent or fluorescent\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDimmable:\u003c\/strong\u003e not stated by the manufacturer\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 110-240 V\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP 20, for dry indoor use\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRecommended area:\u003c\/strong\u003e 10 to 15 m2\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eRecommended rooms:\u003c\/strong\u003e living room and bedroom\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e assembly required, hardwired light fixture\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eWhere to install this wall light?\u003c\/h2\u003e\u003cp\u003eAccording to the manufacturer, Ritta is suitable for areas of ten to fifteen square meters and illuminates a specific zone rather than an entire room. The ideal location is on the wall behind an armchair, at the end of a sofa, or beside a bed. The fabric lampshade diffuses light upwards and downwards, illuminating the reader rather than just the page.\u003c\/p\u003e\u003cp\u003eGeneral installation rule: for reading, place the bottom of the lampshade between 1.20 and 1.40 m above the floor, above the shoulder of a seated person, and position the wall light 30 to 40 cm to the side of the seat.\u003c\/p\u003e\u003ch2\u003eMaterial, finish and care\u003c\/h2\u003e\u003cp\u003eDust the fabric lampshade with a feather duster or soft brush; do not use water or stain remover, as any mark on stretched fabric cannot be removed. Wipe the metal frame with a dry cloth. Avoid compressing the lampshade during cleaning, as the fabric is supported only by its frame.\u003c\/p\u003e\u003ch2\u003eBulb and installation\u003c\/h2\u003e\u003cp\u003eRitta requires an E27 bulb, which must be purchased separately. The manufacturer states that LED, incandescent or fluorescent bulbs are suitable but does not specify a maximum wattage. Under a fabric lampshade, an LED remains the safest choice, as it produces little heat in an enclosed space. The light fixture must be assembled and then wired; according to the manufacturer, the electrical connection should be carried out by an electrician.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich E27 bulb is best for comfortable reading?\u003c\/h3\u003e\u003cp\u003eChoose an E27 LED that produces light equivalent to a standard 40- to 60-W bulb, in warm white around 3000 K: enough light for a book without the harshness of neutral white in a relaxation area. As the manufacturer does not specify an approved wattage, a low-energy LED eliminates any risk of overheating the fabric.\u003c\/p\u003e\u003ch3\u003eCan it be installed with a dimmer?\u003c\/h3\u003e\u003cp\u003eThe manufacturer states that this model is not dimmable. A wall dimmer is therefore not intended for use with it. To adjust the light in a reading nook, vary the bulb's colour temperature and wattage, and place a switch near the seat rather than at the room's entrance.\u003c\/p\u003e\u003ch3\u003eDoes the fabric yellow over time?\u003c\/h3\u003e\u003cp\u003eAll fabric lampshades change over time due to heat and light, especially if the bulb produces a lot of heat. This is the main reason to choose an LED: with an equivalent light output, it produces only a fraction of the heat generated by an incandescent bulb, helping to preserve the fabric's original colour.\u003c\/p\u003e\u003ch3\u003eIs it suitable for a bathroom?\u003c\/h3\u003e\u003cp\u003eNo. The stated IP 20 rating provides no protection against water, and a fabric lampshade is not well suited to the humidity of a bathroom. Reserve Ritta for the living room, bedroom or study, and choose a light fixture with a higher IP rating for a bathroom.\u003c\/p\u003e\u003ch2\u003eFor more\u003c\/h2\u003e\u003cp\u003eDiscover fabric lampshades from \u003ca href=\"\/en\/collections\/applique-murale\"\u003eour range of wall lights\u003c\/a\u003e. Similar models:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/products\/applique-murale-laiton-et-tissu-cotheor\"\u003eCotheor, brass and fabric\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/products\/applique-murale-laiton-antique-yield\"\u003eYield, antiqued brass and fabric\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/products\/applique-murale-tissu-et-laiton-osilan\"\u003eOsilan, fabric and brass\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Le Petit Luminaire","offers":[{"title":"Default Title","offer_id":59037015212363,"sku":"ZL081WTD26H30NO","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1050\/3949\/5499\/files\/ZL081-3cc404f8-0d68-44db-8cd2-619dc392244e.jpg?v=1793207893","url":"https:\/\/le-petit-luminaire.com\/en\/products\/applique-murale-metal-et-tissu-ritta","provider":"Le Petit Luminaire","version":"1.0","type":"link"}